CleverScope 제품 비교표
2009년 2월 12일에 소프트웨어 버젼 4.635 이 출시 되었습니다. 기존 하위 버젼 소프트웨어 사용자분들은 소프트웨어 업그레이드를 하시기 바랍니다. Ethernet 옵션 : USB 통신 모듈을 메인 기판에서 분리한 후 같은 자리에 Ethernet 통신 모듈을 장착 주요 업그레이드 내용 : 디지탈 입력과 외부 트리거 (CS328에만 적용)의 캘리브레이션 개선 스펙트럼 결과에 대한 Maths 와 Full buffer Maths 포함 프로토콜 분석 기능 포함 (SPI, I2C 그리고 UART 분석) - Rom Loader v5.0 으로 업데이트를 실행한 후 사용 가능. 아래 내용 및 이미지를 참조하시기 바랍니다. Maths can now be done on the Full Buffer and Spectrum graph. SPI, I2C and UART are available immediately and work is continuing to enhance the capabilities, including saving and viewing saved files. Select your protocol ..... .....and see the analysis in the digital window ..... And best of all, it is available free to all existing users of Cleverscope. The Digital inputs and External trigger are now included in the calibration process. A new set of device drivers have been written and programming examples for the Windows Visual Studio C++, C#, Borland Delphi and CBuilder, and NI Labview and Labwindows CVI environments. These are all available for download from the website. On the hardware side we are offering an XS version to make it easy for purchasers – this is a fully specified CS328A with 8MSample of memory, 14 bit sampler and a signal generator. The ethernet interface is now available. At present it requires a different version of firmware to be loaded but we are working on a new firmware that will detect which interface is fitted. However, if you need ethernet we have stock for immediate shipment. It does not need to be on the local LAN, you can now connect to a Cleverscope anywhere in the world to control and acquire data. To see a unit in operation connect to a CS328A at one of our labs. Go to Settings | Choose acquirer and programme as shown here – (note that the port setting is important) We have connected the Signal Generator to Channel A and the probe comp to Channel B. This unit will be available for you to connect to for at least a couple of weeks. To try it out, I suggest you set the Sig Gen to sweep a range of frequencies and log the results to your PC. You will need v4.631 for this. Just a short update on Linux, we have purchased the Labview development software and have succeeded in installing the NI-Visa drivers on a couple of distros. We will have a beta version of the CS300 available early in 2009. CS328A는 오실로스코프의 기능을 모두 갖고 있으면서 로직애널라이저의 기본 기능도 제공합니다. 2 아날로그 채널에 8 디지털 채널이 추가되어 풍부한 파형 정보를 보여 줌으로써 여러 회로 설계 지점에서 무슨 일이 일어나고 있는지 동시에 볼 수 있습니다. (참고로, PC Oscilloscope 는 장치에서 수집된 데이타를 PC에서 표시, 분석, 저장 등의 대부분의 작업을 PC에서 하면서 원가 절감 및 기능 강화한 제품을 말합니다)
|