http://ezdaq.com/goods/view?no=143 << 상품 링크

차량의 OBDII(또는 ECU Simulator)과 통신을 하기 위해서는 아래의 케이블이 필요합니다.
http://ezdaq.com/goods/view?no=436             <<  (본 제품의 옵션에서 전용 케이블 선택)
http://ezdaq.com/goods/view?no=459             <<  ECUSim 2000 (차량 ECU 시뮬레이터)

옵션의 OBDII 케이블들(특히 OBD CAN Cable)은 차량(또는 ECU simulator) 의 OBDII 단자에 연결하는 경우 사용하는 케이블입니다.

본 제품과 OBD CAN Cable을 사용해서 자동차 ECU와 통신할 수 있습니다

The USB2-F-7001 is a USB to CANbus adapter which incorporates the FTDI FT245R USB to FIFO interface IC device.  The adapter provides a fast, simple way to connect CANbus devices to a host PC with a USB port.

Each USB2-F-7001 contains a small internal electronic circuit board mounted inside of a plastic case capable of withstanding industrial temperature ranges. The FT245R datasheet, DS_FT245R, is available at http://www.ftdichip.com. The integrated electronics include a Microchip PIC with the ECAN controller.  LEDs give a visual indication of the CANbus status.

The USB2-F-7001 does not require a power supply. It is powered from the USB connection.  The USB2-F-7001 requires 150mA and must be connected directly to a USB Host port, or a self-powered USB hub (i.e. with an external power supply).  Bus-powered USB hubs are not supported since they cannot provide the required current.

Flexible mounting allows the USB2-F-7001 to be used in a variety of applications, from a portable adapter to accompany a laptop to permanent installations in industrial and commercial locations.

The enclosure incorporates a standard USB-B device connector for connection to an upstream host or hub port.  CANbus signals are available on an industry-standard DE-9P connector conforming to the CAN-in-Automation (CiA) DS102-2 pin-out.  The maximum CANbus data rate is 1Mbps. 

The USB2-F-7001 adapter requires USB device drivers, available free from www.easysync-ltd.com, which are used to make the USB2-F-7001 appear as a Virtual COM port (VCP).  Communications in VCP mode are accomplished with ASCII commands to the CAN controller.

Another USB device driver included with the download, the D2XX driver, can also be used with application software to directly access the FT245R, and used in conjunction with a CAN command Application Programming Interface (API) through the use of DLLs.  The high-level API is listed in the documents section:  USB2-F-7001 API Guide.

Features:

• Adds one CANbus port by connecting to USB
• Easy plug & play installation and CANbus device connection
• Works with USB 1.1 & 2.0 Host and Hub ports
• Industry Standard FTDI chip set & drivers for maximum compatibility
• Installs as standard Windows COM port or USB Serial Device.
• COM Port Number can be changed to COM1 to COM4 or any other COM port number required
• Supports Windows Server 2008, 2003, Vista, XP 2000, Linux, Mac OS X
• FIFO:  128 byte transmit buffer, 384 byte receive buffer
• Powered by USB port. No external power adapter required.
• CANbus speed up to 1Mbps
• One DE-9P male connector
• LEDs indicate Initialization and CANbus status for monitoring port status & easy diagnostics
• High-temperature plastic enclosure
• Operating temperature of -40°C to +85°C
• USB cable of 0.9 meter included

메뉴얼 및 DLL 파일 다운로드 --> 아래 링크를 클릭하세요.
사용자 메뉴얼

드라이버

Features:
This module plugs directly into a standard USB port and provides a standard DB9 male output to CAN systems according to CiA (CAN in Automation) DS102-1 recommendations. It is self powered from USB. Use your own RS232 LIB/drivers (in e.g. Visual Basic, Deplhi, C++ etc.) together with the free Virtual COM port driver or use the free Direct driver DLL (see Download page for drivers). Works on Windows and Linux platforms. Free Windows Threaded USB2-F-7001 API DLL or use the ActiveX controller, write applications in a snap.

기존 CANUSB 와 신제품 USB2-F-7001 비교표

옵션 정보
OBD CAN Cable >> http://ezdaq.com/goods/view?no=436   
OBD Y Cable  >>  http://ezdaq.com/goods/view?no=378
OBD Full Pin Cable >> http://ezdaq.com/goods/view?no=327 및  http://ezdaq.com/goods/view?no=317


참고:
결선시 종단 저항을 확인해 주시기 바랍니다.
http://ezdaq.com/board/view?id=board3&page=80&seq=870
특히 문제 발생시 종단 저항을 먼저 확인 부탁드립니다.
(예: 최대속도(1M)에 미달하는 문제, 고속에서 데이타 손실 문제 등)